SHANGHAI UNITE STEEL
One-stop Brand Service Provider For Globle Machinery And Petrochemical Enterprise And Special Steel Distributor.
Add to Cart
AISI 430Ti Stainless steel Bars from China
The 430Ti Stainless steel bar is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
| C (％) | ≤ 0.10 |
| Si(％) | ≤ 1.00 |
| Mn(％) | ≤ 1.00 |
| P(％) | ≤ 0.040 |
| S (％) | ≤ 0.030 |
| Cr (％) | 16.0 ～ 19.5 |
| Ni (％) | ≤ 0.75 |
| Mo(％) | |
| Other (％) | Ti 5×C ≤ 0.75 |
| Condition of heat treatment | - |
| Tensile Rm (MPa) | 515 |
| Yield Rp0.2 (MPa) | 310 |
| Elongation A (%) | 30 |
| Reduction in cross section on fracture Z (%) | 65 |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW)
|
