SUS304 Cold Rolled Stainless Steel Sheet 300 Series ASTM A240

SUS304 cold rolled stainless steel sheet /steel strip/ steel plates

Main differences between hot rolling and cold rolling

1.The cross section of the cold rolled shape steel allows local buckling, which can make full use of the bearing capacity of the post buckling, and the hot rolled steel does not allow the local buckling of the cross section.

2.The causes of residual stress in hot rolled steel and cold rolled steel are different, so the distribution of the cross section is also very different. Cold-formed steel section on the residual stress distribution is curved, and hot-rolled steel or welded steel section on residual stress distribution is a thin film.

3.The free torsion rigidity of the hot rolled steel is higher than that of the cold rolled steel, so the torsion resistance of the hot rolled steel is better than that of the cold rolled steel.

cold Rolled, Annealed No. 2B Finish Can also be furnished: No. 3 Finish – Polished One Side No. 4 Finish – Polished One Side Non-Pattern Lengths Also Available Non-Magnetic* ASTM A 240** | ASME SA-240** | ASTM A 666 Anld.

304 Stainless Steel, Hot Rolled, Annealed & Pickled

Dimensions:
5/16"

Material: Stainless Steel

Grade: 304

Shape: Plate

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.

• Specifications: AISI 304/304L, ASTM A240, AMS 5513/5511
• Finishes: 2B Mill (dull), #4 Brushed (appliances), #8 Mirror
• Applications: sanitary dairy, beverage and food product handling and processing, hospital equipment, marine hardware, kitchen appliances, back splashes, etc.
• Workability: Easy to Weld, Cut, Form and Machine with proper equipment
• Mechanical Properties: Nonmagnetic, Tensile = 85,000 +/-, Yield = 34,000 +/-,
  Brinell = 170
• How is it Measured? thickness X width X length
• Available Stock Sizes: 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size

Stock sizes may vary +/- 1/8". Mill tolerances on thickness & flatness applies.